Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 303)

-303-
Switch# configure terminal
Switch (config)# snmp-server engine-id local 1234567890
4.2.212 snmp-server host
Command:
snmp-server host
snmp-server Set SNMP server's configurations
host Set SNMP host's configurations
Name of the host configuration
Default:
None
Usage Guide:
To enter the SNMP host mode
Example:
To enter the SNMP host mode (Interlogix)
Switch# configure terminal
Switch (config)# snmp-server host Interlogix
Switch (config-snmps-host)#
4.2.212.1 do
Command:
do < exec commands >
do To run exec commands.
Default:
N/A
Usage Guide:
To run exec commands.
Example:
To run “show aaa”.