Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 164)

-164-
4.2.65.126 switchport hybrid allowed vlan
Command:
switchport hybrid allowed vlan [all | none | add | remove |
except ]
switchport
Switching mode characteristics
hybrid
Change PVID for hybrid port
allowed
Set allowed VLAN characteristics when interface is in hybrid mode
VLAN IDs of the allowed VLANs when this port is in hybrid mode
add
Add VLANs to the current list
all
All VLANs
except
All VLANs except the following
none
No VLANs
remove
Remove VLANs from the current list
Default:
All
Usage Guide:
To configure VLAN list of Hybrid VLAN for specific interface
Example:
To configure VLAN list (None) of Hybrid VLAN for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport hybrid allowed vlan none
4.2.65.127 switchport hybrid egress-tag
Command:
switchport hybrid egress-tag [none | all | all except-native]
switchport
Switching mode characteristics
hybrid
Change PVID for hybrid port
egress-tag
Egress VLAN tagging configuration
all
Tag all frames
none
No egress tagging
except-native
Tag all frames except frames classified to native VLAN of the hybrid port
Default:
Untagged Port VLAN