Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 269)

-269-
Usage Guide:
To configure the IP addresses of NTP Server
Example:
To configure the IP address (9.9.9.9) of NTP Server for index 1
Switch# configure terminal
Switch (config)# ntp server 1 ip-address 9.9.9.9
4.2.168 poe admin-mode enable
Command:
poe admin-mode enable
poe
Power Over Ethernet
admin-mode
Enable or disable global PoE management function.
enable
poe admin-mode enable
Default:
Enabled
Usage Guide:
To enable System PoE Admin Mode.
Example:
To enable System PoE Admin Mode.
Switch# configure terminal
Switch (config)# poe admin-mode enable
4.2.169 poe management mode
Command:
poe management mode { class-consumption | class-reserved-power |
allocation-consumption | allocation-reserved-power | lldp-consumption |
lldp-reserved-power }
poe
Power Over Ethernet
management
Use management mode to configure PoE power management method.
mode
mode
allocation-consumption
Max. port power determined by allocated, and power is managed according to power
consumption.