Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 286)

-286-
Usage Guide:
To configure the DSCP Ingress Translation
Example:
To configure the DSCP Ingress Translation (AF11 to AF12)
Switch# configure terminal
Switch (config)# qos map dscp-ingress-translation af11 to af12
4.2.187 qos qce
Command:
qos qce [ { next } | last ] [ interface (
[ ] ) ] [ smac { | | any } ] [ dmac { | unicast |
multicast | broadcast | any } ] [ tag { [ type { untagged | tagged | c-tagged | s-tagged |
any } ] [ vid { | any } ] [ pcp { | any } ] [ dei { | any } ] } ]
[ inner-tag { [ type { untagged | tagged | c-tagged | s-tagged | any } ] [ vid { |
any } ] [ pcp { | any } ] [ dei { | any } ] } ] [ frame-type { any | { etype
[ { | any } ] } | { llc [ dsap { | any } ] [ ssap { |
any } ] [ control { | any } ] } | { snap [ { | any } ] } | { ipv4
[ proto { | tcp | udp | any } ] [ sip { | any } ] [ dip { | any } ] [ dscp
{ | { be | af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 |
af43 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef | va } | any } ] [ fragment { yes | no |
any } ] [ sport { | any } ] [ dport { | any } ] } | { ipv6 [ proto { | tcp |
udp | any } ] [ sip { | any } ] [ dip { | any } ] [ dscp { | { be | af11
| af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | cs1 | cs2 | cs3 |
cs4 | cs5 | cs6 | cs7 | ef | va } | any } ] [ sport { | any } ] [ dport { |
any } ] } } ] [ action { [ cos { | default } ] [ dpl { | default } ]
[ pcp-dei { | default } ] [ dscp { | { be
| af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | cs1 | cs2 |
cs3 | cs4 | cs5 | cs6 | cs7 | ef | va } | default } ] [ policy { | default } ] } ]
qos Quality of Service
qce
QoS Control Entry
action
Setup action
dmac
Setup matched DMAC
frame-type
Setup matched frame type
interface
Int erfaces
last
Place QCE at the end
next
Place QCE before the next QCE ID
smac
Setup matched SMAC