Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 348)

-348-
4.21.5 show access-list ace-status
Command:
show access-list ace-status [ static ] [ link-oam ] [ loop-protect ] [ dhcp ] [ ptp ]
[ upnp ] [ arp-inspection ] [ mep ] [ ipmc ] [ ip-source-guard ] [ ip-mgmt ] [ conflicts ]
[ switch ]
show
Show running system information
access-list
Access list
arp-inspection
The ACEs that are configured by ARP Inspection module
conflicts
The ACEs that did not get applied to the hardware due to hardware limitations
dhcp
The ACEs that are configured by DHCP module
ip-source-guard
The ACEs that are configured by IP Source Guard module
ipmc
The ACEs that are configured by IPMC module
link-oam
The ACEs that are configured by Link OAM module
loop-protect
The ACEs that are configured by Loop Protect module
mep
The ACEs that are configured by MEP module
ptp
The ACEs that are configured by PTP module
static
The ACEs that are configured by users manually
upnp
The ACEs that are configured by UPnP module
Default:
N/A
Usage Guide:
To display the ACE Status.
Example:
To display the ACE Status.
Switch # show access-list ace-status
User
----
S : Static
IPSG: IP Source Guard
IPMC: IPMC
MEP : MEP
ARPI: ARP Inspection
UPnP: UPnP
PTP : PTP
DHCP: DHCP
LOOP: Loop Protect
LOAM: Link OAM