Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 362)

-362-
Switch # show interface GigabitEthernet 1/1 switchport
Name: GigabitEthernet 1/1
Administrative mode: access
Access Mode VLAN: 1
Trunk Native Mode VLAN: 1
Administrative Native VLAN tagging: disabled
Allowed VLANs: 1-4095
Hybrid port configuration
-------------------------
Port Type: C-Port
Acceptable Frame Type: All
Ingress filter: Disabled
Egress tagging: All except-native
Hybrid Native Mode VLAN: 1
Hybrid VLANs Enabled: 1-4095
4.21.24 show interface veriphy
Command:
show interface veriphy
show
Show running system information
interface
Interface status and configuration
veriphy
Run cable diagnostics and show result.
Default:
N/A
Usage Guide:
To display the result of Cable Diagnostics.
Example:
To display the result of Cable Diagnostics for interface GigabitEthernet 1/1.
Switch # show interface GigabitEthernet 1/1 veriphy
Starting VeriPHY - Please wait
Interface Pair A Length P air B, Length
---------------------- ------ ------ ------- -------
GigabitEthernet 1/1 OK 3 OK 3
Pair C L ength Pair D Length