Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 186)

-186-
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping query-interval 600
4.2.66.25 ipv6 mld snooping query-max-response-time
Command:
ipv6 mld snooping query-max-response-time
ipv6 IPv6 configuration commands
mld
Multicast Listener Discovery
snooping
Snooping MLD
query-max-response-time
Query Response Interval in tenths of seconds
0 - 31744 tenths of seconds
Default:
125
Usage Guide:
To configure Querier-interval of MLD snooping for specific VLAN
Example:
To configure Querier-interval (60 seconds) of MLD snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping query-max-response-time 600
4.2.66.26 ipv6 mld snooping robustness-variable
Command:
ipv6 mld snooping robustness-variable
ipv6 IPv6 configuration commands
mld
Multicast Listener Discovery
snooping
Snooping MLD
robustness-variable
Robustness Variable
Packet loss tolerance count from 1 to 255
Default:
2