Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 250)

-250-
4.2.135 mep lck
Command:
mep
lck fr1m | fr1s
mep Maintenance Entity Point
The MEP instance number.
lck
Locked Signal
fr1m
Frame rate is 1 f/min.
fr1s
Frame rate is 1 f/s.
Default:
1 frame/sec
Usage Guide:
To configure Locked Frame Rate of MEP.
Example:
To configure Locked Frame Rate (1 frame/sec) of MEP 2.
Switch# configure terminal
Switch (config)# mep 2 lck
Switch (config)# mep 2 lck fr1s
4.2.136 mep level
Command:
mep
level
mep Maintenance Entity Point
The MEP instance number.
level
The MEG level of the MEP
The MEG level value
Default:
0
Usage Guide:
To configure MEG level of MEP.
Example:
To configure MEG level (2) of MEP 2.
Switch# configure terminal
Switch (config)# mep 2 level 2