Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 215)

-215-
4.2.94.1 default range
Command:
default range
default
Set a command to its defaults
range
A range of IPv4/IPv6 multicast addresses for the profile
Rang e entry name
Default:
None
Usage Guide:
To default IPMC Profile Rule for specific IPMC Profile
Example:
To default IPMC Profile Rule (Entry 1) for specific IPMC Profile (Interlogix)
Switch# configure terminal
Switch (config)# ipmc profile Interlogix
Switch (config-ipmc-profile)# default range 1
4.2.94.2 description
Command:
description
description
Additional description about the profile
Description for the designated IPMC filtering profile
Default:
None
Usage Guide:
To configure description for specific IPMC Profile
Example:
To configure description (999) for specific IPMC Profile (Interlogix)
Switch# configure terminal
Switch (config)# ipmc profile Interlogix
Switch (config-ipmc-profile)# description 999