Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 62)

-62-
interface 10GigabitEthernet | GigabitEthernet } | tag-priority {0-1, 0-3, 2-3,
4-5, 4-7, 6-7, , any} | vid {, any}
ACE ID
action
Access list action
dmac-type
The type of destination MAC address
frametype
F rame type
ingress
Ingress
logging
Logging frame information. Note: The logging feature only
works when the packet length is less than 1518 (without
VLAN tags) and the System Log memory size and logging rate
are limited.
next
Insert the current ACE before the next ACE ID
policy
Policy
rate-limiter
Rat e limiter
redirect
Redirect frame to specific port
shutdown
Shutdown incoming port. The shutdown feature only works
when the packet length is less than 1518 (without VLAN
tags).
tag-priority
Tag priority
vid
VID field
Default:
N/A
Usage Guide:
To update the specific profile for the access list.
Example:
Original:
Profile 1
(action: permit, dmac-type: unicast, frametype: ipv4-icmp, ingress: any, logging: disable, policy: 1,
rate-limiter: 1, tag-priority: 1. vid: 1
).
Updated:
Profile 1
(action: deny, dmac-type: any, frametype: ipv4-icmp, ingress: any, logging: disable, policy: 1, rate-limiter:
1, tag-priority: 1. vid: 1
).
Switch# configure terminal
Switch (config)# access-list ace update 1 action deny dmac-type any