Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 428)

-428-
Switch # show vlan ip-subnet
VCE ID IP Address M ask Length V ID Interface s
------ ----------- ---- ----------- ---- ----------
1 192.168.78.0 24 5 GigabitEthernet 1/1
4.21.106 show vlan mac
Command:
show vlan mac [ address ]
show
Show running system information
vlan
VLAN status
mac
Show VLAN MAC entries
address
Show a specific MAC entry
Default:
N/A
Usage Guide:
To display the MAC-based VLAN information.
Example:
To display the MAC-based VLAN information.
Switch # show vlan mac
MAC Address VID Interfaces
----------- --- --------- -
00-40-55-00-00-00 1 GigabitEthernet 1/1
4.21.107 show vlan protocol
Command:
show vlan protocol [ eth2 { | arp | ip | ipx | at } ] [ snap { | rfc-1042 |
snap-8021h } ] [ llc ]
show
Show running system information
vlan
VLAN status
protocol
Protocol-based VLAN status
eth2
Ethernet protocol based VLAN status
Ether Type(Range: 0x600 - 0xFFFF)
arp
Ether Type is ARP