Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 161)

-161-
4.2.65.121 speed
Command:
speed [10 | 100 | 1000 | 10g | auto]
speed
Configures interfa ce spee d. If you use 10, 10 0, or 1000 ke ywords with the auto ke yword the port will on ly
advertise the specified speeds.
10
10Mbps
100
10 0Mbps
1000
1Gb ps
10g
10 Gbps
auto
Auto negotiation
Default:
Auto
Usage Guide:
To configure line speed for specific interface
Example:
To configure line speed (1Gbps) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # speed 1000
4.2.65.122 switchport access vlan
Command:
switchport access vlan
switchport
Switching mode characteristics
access
Set access mode characteristics of the interface
vlan
Set VLAN when interface is in access mode
VLAN ID of the VLAN when this port is in access mode
Default:
1
Usage Guide:
To configure access VLAN ID for specific interface
Example:
To configure access VLAN ID (5) for GigabitEthernet X/X