KMC Controls BAC-8007 Installation Guide - Manual (Page 76)

Procedure Detailed steps STE display
5 Enter the baud 1. Press the or buttons to select a new baud.
2. Press the Set Point
button is save the selected baud.
The display returns to COMM .
BAUD
384OO
6 Advance or exit 1. Press the or buttons to select one of the
following:
BLNC or CNFG options
EXIT to return to the temperature display.
2. Press the Set Point
button to select the next function.
COMM
Procedure to set up network communications (continued)
Section 8: System integration and networking SimplyVAV
76 Revision E