Section 8: system integration and networking, System, Integration and networking – KMC Controls BAC-8007 Installation Guide User Manual
Page 71
S e c t i o n 8 :
Sy s t e m i n t e g r at i o n an d n e t w o r ki n g
Topics in this section cover integrating the controllers into a building
automation network. These are advanced reference topics for control
technicians and engineers.
The controllers can be installed as standalone controllers or they can be
connected to a BACnet MS/TP network. The topics in this section are
reference material for control technicians or engineers who are planning,
installing, and setting up controllers that are connected to a network.
In addition to the information in this section, you will also need the following
information.
Detailed plans and drawings for the building automation system.
Information about the facility LAN including routers, switches, and
network firewalls.
Sequences of operation for other BACnet devices that will monitor or
interact with SimplyVAV controllers.
Integration topics
Connecting to an MS/TP network
Setting up network communications
SimplyVAV
Revision E
71