KMC Controls BAC-8007 Installation Guide - Manual (Page 41)

Procedure Detailed steps STE display
2 Select the restore settings
display. 1. From the CNFG display, press the or
buttons to show the CNFG display.
2. Press the Set
Point
button to select the CNFG options.
The display changes to STPT .
3. Press the or buttons to change the
display to RSTR .
Caution : Choosing RSTR deletes all
previously entered values and returns the
controller to the manufacturer's settings. Only
the BACnet communications settings will
remain unchanged.
4. Press the Set Point
button to select RSTR .
CNFG
STPT
1341
3 Choose the application. 1. Press the or buttons to choose ENGLISH
or METRIC .
Metric The sensor displays temperature in
Celsius and uses metric values for units of
measure.
English The sensor displays temperature in
Fahrenheit and uses English values for units of
measure.
2. Press the Set Point
button to save the entry and
advance to the next function.
-%41)#
1341
%.',)3(
1341
Procedure to restore application (continued)
SimplyVAV Section 4: Configuring the controllers
Revision E 41