HP 48g Graphing Calculator User Manual
Page 405
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To free a merged RAM card and mo¥e backup objects there:
1. Back up the desired objects into port 0—see “To back up an
object” on page 28-3.
2. Enter a list (with C ]■ delimiters) containing the simple names of
the backup objects in port 0.
3. Press
m e m o r y
! FFiEE 1. The objects named in the list are
removed from port 0 and stored in the newly freed RAM card (in
port memory).
4. Optional: Turn off the HP 48 and unplug the card—see “To remove
a plug-in card” on page 28-14.
To change the write-protect switch with the card installed:
1. Make sure the card contains free, unmerged port memory—see “To
check the type of memory in a port” on page 28-15.
2. Turn off the HP 48.
3. Move the switch to the correct position:
■ For Read Only, the switch is toward the corner of the card.
■ For Read/Write, the switch is away from the corner of the card.
28
Libraries, Ports and Plug-In Cards 28-17