Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER - Manual (Page 8)

8 Publication 1404-UM001F-EN-P - November 2009
Preface Preface
What This User Manual Does Not Contain
Topics related to installation and wiring are not covered in this
manual. Refer to the Powermonitor 3000 Installation Instructions,
publication
1404-IN007 , for the following information:
•
Selecting an enclosure for the Powermonitor 3000 unit and
associated equipment.
•
Mounting and wiring of the master module.
•
Mounting and connection of the display module (refer to
publication
1404-IN005 ).
•
Selection and connection of current transformers (CTs) and
potential transformers (PTs)
•
Wiring to native and optional communication ports.
This manual does not provide information on functionality found in
the Powermonitor 3000 master module, firmware revision 3.0 or
earlier, Ethernet series A modules, all firmware revisions, or Ethernet
series B modules, firmware revision 2.0 or earlier.
For this information, please refer to publications 1404-IN007D-EN-E
and 1404-UM001D-EN-E , available as downloads from
http://www.rockwellautomation.com/literature .
Advanced Features 8
Oscillography
Harmonic Analysis
Sag and Swell
Load Factor
Transient Detection, Metering and Capture
Powermonitor 3000 Data Tables A
Catalog Number Explanation B
Sample Applications C
Technical Specifications D
Frequently Asked Questions E
Glossary Glossary
Index Index
For information about Refer to
Chapter