Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER - Manual (Page 20)

20 Publication 1404-UM001F-EN-P - November 2009
Chapter 2 Product Description
•
Compatible with commercially available network bridges,
routers, hubs and switches
•
Fully software configurable
•
Supports RSLinx software
•
Supports Allen-Bradley Client Server Protocol (CSP)
•
Supports EtherNet/IP (CIP) protocol
•
Configurable I/O channel assembly instance: six parameters
default, twenty-three maximum
•
Configurable explicit assembly instance: seventeen parameters
default, twenty-three parameters maximum
•
Explicit assembly instances for access to all data
•
Two I/O assembly instances
•
Remotely resettable through Identity Object
•
Supports up to 64 CIP/HTTP concurrent connections
•
Data read latency: less than 10 ms
•
Update rates for real-time metering data: 100 ms minimum
•
Update rates for logged data: 250 ms minimum
•
Supports network-based time synchronization via SNTP
•
Supports networked demand period synchronization
•
Supports Class 1 scheduled connection for I/O data
ControlNet Optional Communication
A catalog number ending in -CNT specifies a power monitor with a
ControlNet communication interface in addition to the native RS-485
port. The ControlNet interface has the following features:
•
Adapter class device
•
Supports redundant media or single media applications; physical
connections include NAP port and two BNC connectors
•
ControlNet International conformace tested and approved
•
Compatible with ControlLogix, PLC-5, and SLC controllers,
PanelView units, RSEnergyMetrix, RSPower, and RSPowerPlus
software, and more
•
All power monitor data readable/writable via unscheduled
(UCMM or Class 3) connection to Powermonitor assembly object
instances 3…64
•
Supports scheduled messaging (Class 1 connection); one
assembly instance of configurable content from the power
monitor and one assembly instance of fixed content to the
power monitor