Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER - Manual (Page 202)

202 Publication 1404-UM001F-EN-P - November 2009
Appendix A Powermonitor 3000 Data Tables
DeviceNet
Element
No. Modbus
Address Element name Range Default
Value Comment
0 40401 Password 0…9999 0 Valid password required to change configuration data. Returns -1
1 40402 Node address
(MAC ID) 0…64 63 Address 64 enables remote node address programming; there is
no actual node address of 64 defined for the DeviceNet network
2 40403 Baud rate 0…4 0 0 = 125 Kbps
1 = 250 Kbps
2 = 500 Kbps
3 = Auto
4 = Programmable
3 40404 Bus Off Interrupt
Action 0…1 0 0 = hold CAN chip in reset
1 = reset CAN chip and continue communication
4 40405 Floating point
data format 0…1 0 0 = Compliant with prior versions, word order swapped
1 = CIP compliant, little Endian
5 40406 Reserved 0 0 Reserved. Must be 0 on a write, returns 0
6 40407
7 40408
8 40409
9 40410
10 40411
11 40412
12 40413
13 40414
14 40415
15 40416
16 40417
17 40418
18 40419
19 40420