Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER - Manual (Page 302)

302 Publication 1404-UM001F-EN-P - November 2009
Appendix C Sample Applications
Data Tables
ML1400 data table N111 is the destination table for the Read message
and N211 is the source for the Write message. Table N211 contains the
following values for setting the date and time in a power monitor with
a password of 0 to January 1, 2003 at 12:00 midnight.
The Read Clock from PM3K and Set Clock from ML1400 bits are used
to initiate the messages, and are reset when the message instruction
either completes successfully or an error occurs. In your application
code, if the message rungs are controlled programmatically, be sure
that only one message is enabled at a time.
Ladder Program