Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER - Manual (Page 221)

Publication 1404-UM001F-EN-P - November 2009 221
Powermonitor 3000 Data Tables Appendix A
18 40819
Parameter #9 selection
(1) 0…301 0
19 40820 Parameter #10 selection
20 40821 Parameter #11 selection
21 40822 Parameter #12 selection
22 40823 Parameter #13 selection
23 40824 Parameter #14 selection
24 40825 Parameter #15 selection
25 40826 Parameter #16 selection
(1) For DeviceNet Powermonitor units you may configure parameters 9…16 but the Trend Log Results Parameters tabke returns only the first eight parameters.
Trend Log Configuration/Read-back Record Select
Element
No. Modbus
Address Element Name Range Default
Value Comment
Trend Log Results Parameters
CSP File No. F25
Remote I/O BT 48
CIP Assy. Inst. 28
No. of Elements 14 (DeviceNet network only), 22 (All other communication types)
User Configurable Yes
Data Type Floating Point
Data Access Read only
PM3000 Type All
Trend Log Results
Element
No. Modbus
Address Element Name Range Comment
0 30701-02 Reserved 0 Returns 0
1 30703-04 Internal Identifier 0…15 Increment from 1…15 for each record, rolls to 0
2 30705-06 Timestamp; Year
Month/Date
Hour/minute
Seconds/hsec
1998…2097 Date and time record was recorded. Refer to Expressing Data in
Data Tables on page 82
3 30707-08 0101…1231
4 30709-10 0000…2359
5 30711-12 0000…5999