Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER - Manual (Page 119)

Publication 1404-UM001F-EN-P - November 2009 119
Communication Chapter 4
Create a PLC-5 Typed Writes
The following selection performs a write operation to the basic
configuration table F10 of the power monitor.
Insert a MSG Instruction to the ladder rung and assign a control.
This example writes configuration to the Basic Configuration table,
File F10 in the power monitor.
This message transfers 9 floats from table F8:0 to the power monitor
table F10. The power monitor address is at node 4, local message.