Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER - Manual (Page 260)

260 Publication 1404-UM001F-EN-P - November 2009
Appendix A Powermonitor 3000 Data Tables
Network Demand Sync and Time Configuration Parameters
CSP File No. N52
Remote I/O BT -
CIP Assy. Inst. 65, 66
No. of Elements 20
User Configurable No
Data Type Integer
Data Access Read / Write
PM3000 Type Ethernet
Network Demand Sync and Time Configuration
Element
No. Modbus
Address Parameter Name Range Default
Value Description
0 41901 Password 0…9999 0 On a write, the correct password is required to change
configuration data. On a read, -1 is returned.
1 41902 Input mode 0…3 3 Refer to Network Demand / Time Configuration on
page 55
.
2 41903 Broadcast port number 300…
400 300
3 41904 SNTP IP address 1, octet 1 0…255 0
4 41905 SNTP IP address 1, octet 2
5 41906 SNTP IP address 1, octet 3
6 41907 SNTP IP address 1, octet 4
7 41908 Time zone -12…12 0
8 41909 Time set update interval 0…
32,766 60 s
9 41910 SNTP IP address 2, octet 1 0…255 0 SNTP IP address 2 is a back-up server address when
the first address fails.
10 41911 SNTP IP address 2, octet 2 0
11 41912 SNTP IP address 2, octet 3 0
12 41913 SNTP IP address 2, octet 4 0
13 41914 SNTP IP address 3, octet 1 0 SNTP IP address 3 is a back-up server address when
the secnond address fails.
14 41915 SNTP IP address 3, octet 2 0
15 41916 SNTP IP address 3, octet 3 0
16 41917 SNTP IP address 3, octet 4 0
17 41918 Reserved 0 0 Reserved for future use.
On a write, only a 0 is accepted. On a read, always
returns 0.
18 41919 Reserved 0 0
19 41920 Reserved 0 0