Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER - Manual (Page 268)

268 Publication 1404-UM001F-EN-P - November 2009
Appendix A Powermonitor 3000 Data Tables
Parameters for Trend Log and Configurable Table Parameters
Applies to Trend Log Configuration/Read-back Record Select Parameters on page 220
Trend Log Results Parameters on page 221
User-configured Table Setup Parameters on page 233
User-configured Table Results Parameters on page 235
PM3000 Type Ethernet
Parameters for Trend Log and Configurable Table
Param
No. Parameter Name Comment
0 None No parameter
1 Relay output status Refer to Discrete Data Parameters
2 Solid-state KYZ output status
3 Alarm output word
4 Status inputs state
5 Status input #1 counter
6 Status input #2 counter
7 Voltage Mode (Wiring Configuration) Refer to Basic Device Configuration Parameters
8 PT Primary
9 PT Secondary
10 I1/I2/I3 CT Primary
11 I1/I2/I3 CT Secondary
12 I4 CT Primary
13 I4 CT Secondary
14 Date: Year Refer to Date and Time Parameters
15 Date: Month
16 Date: Day
17 Time: Hour
18 Time: Minute
19 Time: Seconds
20 Time: Hundredths of seconds
21 Date: Month/day Refer to Date and Time Parameters (compacted to take less space)
22 Time: Hour/minute
23 Time Second/hsec