Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER - Manual (Page 247)

Publication 1404-UM001F-EN-P - November 2009 247
Powermonitor 3000 Data Tables Appendix A
Load Factor Log Configuration/Read-back Select Parameters
CSP File No. N41
Remote I/O BT 16
CIP Assy. Inst. 49 (Write), 50 (Read)
No. of Elements 6
User Configurable No
Data Type Integer
Data Access Read / Write
PM3000 Type M6, M8 only
Applies to: Load Factor Log Results Parameters on page 248
Load Factor Log Configuration/Read-back Select
Element
No. Modbus
Address Element Name Range Default
Value Comment
0 - Password 0…9999 0 Required for configuration or command,
-1 for readback select, returns -1
1 - Record to read-back 0…12 0 Refer to Reading the Load Factor Log on
page 178
2 - Read-back mode 0…1 1
3 - Clear peak / reset average command 0…1 0
4 - Auto clear/reset day 0…31 31
5 - Reserved 0 0