JUMO 705010 mTRON T - Multichannel Controller Module Operating Manual - Manual (Page 95)

95
6 Configuration
Parameter
Setup dialog
Parameters
Parameter Selection/settings Description
Gradient positive 0 to 999.9 Value for positive ramp slope
Gradient negative 0 to 999.9 Value for negative ramp slope
Initial value 0 to 999.9 Adjustable ramp start value (used if no
analog signal has been selected as the
start value)
Tolerance band 0 to 1 to 999.9 Amount of admissible upward and
downward deviation of the actual value
(setpoint value is in center)

"Tolerance band", page 92
Gradient unit Kelvin/minute Unit of ramp slope
Kelvin/hour
Kelvin/day