JUMO 705010 mTRON T - Multichannel Controller Module Operating Manual - Manual (Page 133)

133
9 Online parameters
9.1.4 Digital output
Setup dialog
Parameters
Digital output 3 to Digital output n
Parameter Selection/settings Description
Digital output 3
to
Digital output n Select output (activate checkbox).
You can select multiple outputs.
An output that is selected is set to
"active".
Set all Click the "Set all" button. All outputs are set to "active".
Delete all Click the "Delete all" button. All outputs are set to "inactive".
?
Type of digital output "Active" status "Inactive" status
Relay (N/O contact) Closed Open
Relay (changeover contact) Operating position Idle position
Logic output High level (1) Low level (0)
Solid state relay Not inhibited Inhibited
Open-collector output Not inhibited Inhibited