JUMO 705010 mTRON T - Multichannel Controller Module Operating Manual - Manual (Page 108)

6 Configuration
108
6.14.3 Analog signals (overview)
The following table contains all signals that are available in the NV connecting list for connec-
tion to the external inputs (NV_...) of the multichannel controller module.
Category Signal Description
Inactive No signal selected
Central processing unit
Analog variables Analog variable 1 to 64 Analog variable 1 to 64 (via interface)
Program
generator 1 to
Program
generator 9 Channel 1 SP1 to Channel 3 SP1 Setpoint value 1 of program channel 1 to 3
Channel 1 SP2 to Channel 3 SP2 Setpoint value 2 of program channel 1 to 3
Channel 1 SP2 to Channel 3 SP2 Setpoint value 3 of program channel 1 to 3
Channel 1 SP4 to Channel 3 SP4 Setpoint value 4 of program channel 1 to 3
PLC Analog output 13 to 16 Signal of PLC analog output 13 to 16
Analog PLC out-
put block 10 to
block 18 PLC Analog output 1 to 16 Signal of PLC analog output 1 to 16
Multichannel controller module
Controller C01ActualValue to
C04ActualValue Actual value of controller channel 1 to 4
C01Setpoint to C04Setpoint Setpoint value of controller channel 1 to 4
C01OutpLevelMon to
C04OutpLevelMon Output level (display value) of controller
module 1 to 4
Analog inputs AI01 to AI04 Measured value of analog input 1 to 4
Mathematics Math01 to Math04 Result of math function 1 to 4
HW counter HWCounter Counter reading of hardware counter