JUMO 705010 mTRON T - Multichannel Controller Module Operating Manual - Manual (Page 88)

6 Configuration
88
6.9.5 Controller collective alarm
Four collective alarms are available, which are typically assigned to the four controller chan-
nels. However, they can also be used independently of the controller channels. A collective
alarm is compiled from a maximum of eight signals from the digital selector (OR-linking).
Setup dialog
Parameters
Status after change of configuration
Modified parameters are incorporated immediately.
Behavior after power on
After initialization, the collective alarms are available immediately, according to their configura-
tion.
Parameter Selection/settings Description
Signal 1 to 8 Digital selector (Inactive) Selection of a maximum of eight signals
for the collective alarm
The output signal (result of OR-linking)
is available in the digital selector.