JUMO 705010 mTRON T - Multichannel Controller Module Operating Manual - Manual (Page 56)

6 Configuration
56
Resistance/potentiometer 2-w Resistance/potentiometer in 2-wire cir-
cuit
Resistance/potentiometer 3-w Resistance/potentiometer in 3-wire cir-
cuit
Resistance/potentiometer 4-w Resistance/potentiometer in 4-wire cir-
cuit
Linearization Available options and factory settings depend on the measuring probe selected.
Linear
Pt50 GOST 6651-94
Pt100 DIN EN 60751
Pt500 DIN EN 60751
Pt1000 DIN EN 60751
Pt100J JIS 1604
Pt100G GOST 6651-94
KTY Type KTY11-6
Cu50 GOST 6651-94
Cu100 GOST 6651-94
Ni100 DIN EN 60751
NiCr-CuNi_E DIN EN 60584
Cu-CuNi_T DIN EN 60584
Fe-CuNi_J DIN EN 60584
Cu_CuNi_U
Fe-CuNi_L
NiCr-Ni_K DIN EN 60584
Pt10Rh-Pt_S DIN EN 60584
Pt13Rh-Pt_R DIN EN 60584
Pt30Rh-Pt6Rh_B DIN EN 60584
NiCrSi-NiSi_N DIN EN 60584
W5Re-W26Re_C
W3Re-W25Re_D
W3Re-W26Re
Chromel-Copel GOST 8.585-2001
Chromel-Alumel GOST 8.585-2001
Platinel II
Customer-specific Customer-specific linearization using
grid points (pairs of values) or 4th order
polynomial
Parameter Selection/settings Description
?