JUMO 705010 mTRON T - Multichannel Controller Module Operating Manual - Manual (Page 141)

141
11 Appendix
11.1 Technical data
11.1.1 Analog inputs
General information
Thermocouples
RTD temperature probe
Number (standard version) 2 (input 1 and 2)
Optional number (option slot 1 to 3) 2 (input 3 and 4)
A/D converter Dynamic resolution up to 16 bit
Designation Standard Measuring range Measuring accu-
racy
1
Ambient tempera-
ture influence
Fe-CuNi “L” -200 to +900 °C
 0.1 % from -100 °C 300 ppm/K
Fe-CuNi “J” DIN EN 60584 -200 to +1200 °C
 0.1 % from -100 °C 300 ppm/K
Cu-CuNi “U” -200 to +600 °C
 0.1 % from -130 °C 300 ppm/K
Cu-CuNi “T” DIN EN 60584 -200 to +400 °C
 0.1 % from -150 °C 300 ppm/K
NiCr-Ni “K” DIN EN 60584 -200 to +1372 °C
 0.1 % from -80 °C
300 ppm/K
NiCr-CuNi “E” DIN EN 60584 -200 to +1000 °C
 0.1 % from -80 °C
300 ppm/K
NiCrSi-NiSi “N” DIN EN 60584 -100 to +1300 °C
 0.1 % from -80 °C
300 ppm/K
Pt10Rh-Pt “S” DIN EN 60584 -50 to 1768 °C
 0.15 % from 20 °C 300 ppm/K
Pt13Rh-Pt “R” DIN EN 60584 -50 to 1768 °C
 0.15 % from 20 °C 300 ppm/K
Pt30Rh-Pt6Rh “B” DIN EN 60584 0 to 1820 °C
 0.15 % from 400 °C 300 ppm/K
W5Re-W26Re “C” 0 to 2320 °C
 0.15 % from 500 °C 300 ppm/K
W3Re-W25Re “D” 0 to 2495 °C
 0.15 % from 500 °C 300 ppm/K
W3Re-W26Re 0 to 2400 °C
 0.15 % from 500 °C 300 ppm/K
Chromel-Copel GOST 8.585-
2001 -200 to +800 °C
 0.15 % from -80 °C 300 ppm/K
Chromel-Alumel GOST 8.585-
2001 -200 to +1372 °C
 0.1 % from -80 °C
300 ppm/K
PLII (Platinel II) 0 to 1395 °C
 0.1 % from -80 °C
300 ppm/K
Linear 0 to 75 mV
 0.1 %
300 ppm/K
Cold junction Pt100 internal
Cold junction accuracy
 1 K
1
The accuracy values refer to the maximum measuring range. Smaller measuring ranges lead to reduced lineariza-
tion accuracy.
Designation Standard Measuring range Measuring accu-
racy
1
Ambient tempera-
ture influence
Pt100 DIN EN 60751 -200 to +850 °C 50 ppm/K
2-wire circuit
 0.15 %
3-wire/4-wire circuit
 0.05 %
Pt500 DIN EN 60751 -200 to +850 °C 50 ppm/K
2-wire circuit
 0.30 %
3-wire/4-wire circuit
 0.15 %