JUMO 705010 mTRON T - Multichannel Controller Module Operating Manual - Manual (Page 109)

109
6 Configuration
Setpoint value SP01RampValue to
SP04RampValue Ramp end value of ramp function 1 to 4
(if ramp function switched on)
or
Active setpoint value (external setpoint value +
setpoint value) of setpoint function 1 to 4
(if ramp function switched off)
Analog input module 4-channel
Analog inputs AI01 to AI04 Measured value of analog input 1 to 4
Analog input module 8-channel
Analog inputs AI01 to AI08 Measured value of analog input 1 to 4
Multifunction panel 840
System bus
analog inputs Counter/Int 1 to Counter/Int 27 Current value of counter or integrator
Counter/Int clo 1 to
Counter/Int clo 27 Value of counter or integrator in most recent
closed measuring period
Process image Current process image Number of current process image on the dis-
play of the multifunction panel
0 = process image 1, 1 = process image 2 etc.
(-1 = no active process image)
Category Signal Description