JUMO 705010 mTRON T - Multichannel Controller Module Operating Manual - Manual (Page 146)

11 Appendix
146
11.1.7 Case and ambient conditions
11.1.8 Approval/approval marks
Stripping length on terminals 1 to 11 9 mm
Conductor cross section on terminals 12 to
28
Wire or strand without ferrule Min. 0.5 mm
2
, max. 2.5 mm
2
Strand with ferrule Min. 0.5 mm
2
, max. 2.5 mm
2
2 x strand with twin ferrule
with plastic collar Min. 0.5 mm
2
, max. 1.5 mm
2
(both strands with the same cross sec-
tion)
Stripping length on terminals 12 to 28 10 mm
Electrical safety Acc. to EN 61010-1
Overvoltage category III, pollution degree 2
Electromagnetic compatibility Acc. to EN 61326-1
Interference emission Class A – only for industrial use –
Interference immunity Industrial requirements
Case type Plastic case for DIN rail mounting in the control cabinet (indoor use);
DIN rail acc. to DIN EN 60715, 35 mm x 7.5 mm x 1 mm
Dimensions (W x H x D) 45 mm x 103.6 mm x 101.5 mm (without connection elements)
Weight (fully equipped) Approx. 250 g
Protection type IP20, acc. to DIN EN 60529
Ambient temperature range -20 to +55 °C
Storage temperature range -40 to +70 °C
Resistance to climatic conditions Relative humidity
 90 % annual average without condensation (cli-
matic class 3K3 acc. to DIN EN 60721-3-3 with extended tempera-
ture and humidity range)
Site altitude Up to 2000 m above sea level
Mechanical ambient conditions
1
Classification acc. to DIN EN 60721-3-3, table 6, class 3M2
1
Test conditions are listed in the System Descripton B 705000.8.
Approval mark Testing agency Certificate/certifica-
tion number Inspection basis Valid for
c UL us Underwriters Laborato-
ries E201387 UL 61010-1 (3. Ed.),
CAN/CSA-22.2
No. 61010-1 (3. Ed.) all types