JUMO 705010 mTRON T - Multichannel Controller Module Operating Manual - Manual (Page 48)

6 Configuration
48
Setpoints NV_SP01Ext to NV_SP04Ext External External setpoint value for set-
point value function 1 to 4
SP01RampOutput to
SP04RampOutput Internal Current setpoint value of ramp
function 1 to 4
SP01Active to SP04Active Internal Active setpoint value (external
setpoint value + setpoint value) of
setpoint value function 1 to 4
SP01Setpoint1 to SP04Setpoint1 Internal Setpoint value 1 (fixed setpoint
value or correction value) of set-
point value function 1 to 4
SP01Setpoint2 to SP04Setpoint2 Internal Setpoint value 2 (fixed setpoint
value or correction value) of set-
point value function 1 to 4
SP01Setpoint3 to SP04Setpoint3 Internal Setpoint value 3 (fixed setpoint
value or correction value) of set-
point value function 1 to 4
SP01Setpoint4 to SP04Setpoint4 Internal Setpoint value 4 (fixed setpoint
value or correction value) of set-
point value function 1 to 4
Analog inputs AI01 to AI04 Internal Measured value of analog input 1
to 4
Mathematics Math01 to Math04 Internal Result of math function 1 to 4
NV_M01Flag to NV_M04Flag External Any analog value 1 to 4
(freely available)
Hardware coun-
ter HWCounter Internal Counter reading of hardware
counter
NVAnalogOut-
puts NV_AO01 to NV_AO03 External Signal for controlling analog out-
put 1 to 3
Category Signal Type Description