JUMO 705010 mTRON T - Multichannel Controller Module Operating Manual - Manual (Page 145)

145
11 Appendix
Per optional board (option slot 1 to 3)
11.1.5 Controller
11.1.6 Electrical data
1 relay output (changeover contact)
Output 5, 7, and 9)
Switching capacity 3A at AC 230V resistive load
3A at DC 30V resistive load
Contact life 350,000 operations at rated load / 750,000 operations at 1 A
2 relay outputs (N/O contacts with common
pole)
(Output 5 to 10)
Switching capacity 3A at AC 230V resistive load
3A at DC 30V resistive load
Contact life 350,000 operations at rated load / 900,000 operations at 1 A
1 solid-state relay
(Output 5, 7, and 9)
Switching capacity 1 A at 230 V
Protection circuitry Varistor
2 open-collector outputs
(Output 5 to 10)
Status logical "0” (transistor inhibited):
Allowable voltage via switching transistor Min. 5 V, max. 30 V
Maximum reverse current 0.1 mA
Status logical "1” (transistor switched):
Maximum voltage via switching transistor
 1.6 V
Maximum current 50 mA
Controller types Two-state controller, three-state controller, modulating controller,
continuous controller, continuous controller with integrated actuator
controller
Controller structures P, PD, PI, PID
Sampling rate 50 ms, 100 ms, 150 ms, 200 ms, or 250 ms
Voltage supply
Connection Lateral (feed via base unit or router module)
Voltage input DC 24 V +25/-20 %
Residual ripple 5 %
Current consumption Max. 300 mA (at DC 19.2 V)
Power consumption Max. 6 W
Inputs and outputs (terminals 1 to 28)
Connection At the front (removable terminal strips with Push-In technology)
Conductor cross section on terminals 1 to 11
Wire or strand without ferrule Min. 0.14 mm
2
, max. 1.5 mm
2
Strand with ferrule Without plastic collar: Min. 0.25 mm
2
, max. 1.5 mm
2
With plastic collar: Min. 0.25 mm
2
, max. 0.5 mm
2