Apple Color 1.0 - Manual (Page 273)

Chapter 13 Managing Corrections and Grades 273
To copy a primary correction to every single shot in the Timeline:
1 Move the playhead to a shot with a grade you want to copy to other shots in your
program.
2 Set the grade used by that shot to the one you want to copy.
3 Click “Copy to All.”
The grade at the current position of the playhead is copied to every shot in your
program.
Note: The Secondaries and Color FX rooms don’t have “Copy to Selected” or “Copy to
All” buttons. However, you can accomplish the same task by saving a Secondaries or
Color FX correction to the Secondaries room bin, then selecting the shots you want to
apply that correction to, and dragging the correction onto one of the selected shots. For
more information, see “
Applying Saved Corrections and Grades to Shots ” on page 268.
Using the Copy Grade and Paste Grade Memory Banks
You can use the Copy Grade and Paste Grade commands to copy grades from one shot
and paste them to others. Five memory banks are available for copying and pasting
grades. This means that you can copy up to five different grades—with one in each
memory bank—and then paste different grades into different shots as necessary.
To copy a grade into one of the five memory banks:
1 Move the playhead to the shot you want to copy a grade from.
2 Make the grade you want to copy the currently selected grade.
3 Choose Grade > Copy Grade > Mem-Bank 1 through 5 (Shift-Control-Option-1 through 5).
Once you’ve copied a grade into one of the available memory banks, you can paste it.
To paste a grade from one of the five memory banks:
1 Move the playhead to the shot you want to copy a grade to.
2 Set the currently selected grade to the grade you want to paste into.
3 Choose Grade > Copy Grade > Mem-Bank 1 through 5 (Shift-Option-1 through 5).
The grade is applied to the shot at the position of the playhead.