Apple Color 1.0 - Manual (Page 270)

270 Chapter 13 Managing Corrections and Grades
To change the selected grade:
1 Move the playhead to the shot you want to change the grade of.
2 Do one of the following:
 Click the grade you want to switch to.
 Press Control-1 through 4.
 Control-click or right-click on a grade, and choose Select Grade X from the shortcut
menu, where X is the number of the grade you’re selecting.
The shot is updated to use the newly selected grade.
Resetting Grades in the Timeline
If necessary, you can reset any of a shot’s four grades.
To reset a grade in the Timeline:
1 Move the playhead to the shot you want to switch the grade of.
2 in the grade track of the Timeline, control-click or right-click the grade you want to
reset to and choose Reset Grade X from the shortcut menu (where X is the number of
the grade).
Resetting a grade clears all settings from the Primary In, Secondaries, Color FX, and
Primary Out rooms, bringing that shot to its original state. Pan & Scan settings in the
Geometry room are left intact.
Copying Corrections and Grades in the Timeline
You can copy individual corrections or entire grades from one shot to another in the
Timeline.
To copy a correction from one shot to another:
m Drag a single correction bar in the grade track of the Timeline to the shot you want to
copy it to.
The shot you’re dragging the correction onto becomes highlighted, and after you’ve
dropped it, the current grade for that shot appears with the same grade bar.