Apple Color 1.0 - Manual (Page 144)

144 Chapter 8 Video Scopes
Video Scope Options
You have the following ways of modifying the display and behavior of the video
scopes.
To enable real-time video scope updates:
1 Open the User Preferences tab located inside the Setup room.
2 Select Update UI During Playback.
3 To set the video scopes to update during playback, select Update Secondary Display.
∏
Tip: You can turn off Update Primary Display to improve playback performance.
Some scopes have the option to be switched among different modes.
To change a scope to a different mode:
m Click the button corresponding to desired mode at the top of that scope.
Any quadrant containing a video scope can also be switched to a different kind of
scope.
To switch which scope is displayed in a particular region of the Scopes window:
m Control-click or right-click within any scope, and choose a different scope from the
shortcut menu.
All scopes can be zoomed into to get a closer look at the graph.
To zoom a scope’s display, do one of the following:
m Roll the scroll wheel or scroll ball of your mouse down to zoom into a particular scope’s
display, and up to zoom out.
m Click one of the percentage buttons at the upper left corner of the Vectorscope to scale
the scope’s display.
The 3D video scopes can also be rotated in space so that you can view the analysis
from any angle.
To reposition any 3D scope, do one of the following:
m Drag horizontally or vertically to rotate the scope model in that direction.
m Hold the middle button down and drag to reposition the scope model in that direction.