Outback Power Systems MATE3 Owners Manual - Manual (Page 82)

Programming
80 900-0117-01-00 Rev C
Installer Information
The Installer Information screen allows a location to enter basic installer information.
Figure 85 Installer Information
Installer Settings
The Installer Settings menu provides the ability to:
 Set User Access Level , preventing unauthorized access to certain levels of menus ,
 Change Installer Password, allowing an installer access to the full menus, or to
 Challenge Installer Password, in case the installer password is lost.
Figure 86 Installer Settings Screen
Set User Access Level
The Set User Access Level menu allows four different user access levels (UALs) to set points for
programming.
Figure 87 Set User Access Level
Set Points:
 Company – Any combination of characters up to
28 characters maximum.
 Name – Any combination of characters up to
19 characters maximum.
 Phone – Any combination of characters up to
15 characters maximum.
 Notes – Any combination of characters up to
31 characters maximum.
Set Points:
 Full – Access Level 1 (UAL1) – This allows full access to all
menus that are available.
 Advanced – Access Level 2 (UAL2) – This allows access to the
advanced user menus that are available.
 Basic – Access Level 3 (UAL3) – This allows access to the basic
user menus that are available.
 Minimum – Access Level 4 (UAL4) – This allows minimum
access to the user.
See page 163 through 168 for menu maps that illustrate the user
access levels and which screens are available for each level.