Saving the update to the sd card, Firmware update – Outback Power Systems MATE3 Owners Manual User Manual

Page 147

Firmware Update

900-0117-01-00 Rev C

145

Firmware Update

The

Firmware Update

screen enables the MATE3 to download the latest firmware revision from an

SD Memory Card (included). The MATE3 and the Radian inverter can be upgraded this way. Other devices
may be able to be upgraded in the future.

Saving the Update to the SD Card

To copy the latest firmware update to the SD card:

1. Go to the OutBack web site to locate the MATE3 or Radian firmware download.

98H99H

http://outbackpower.com/

99H100H

http://www.outbackpower.com/products/communications/mate3/

2. Look for the hyperlinks shown in Figure 176 or Figure 177. Click on the link to initiate the download.

3. When the File Download window appears, select SAVE and save the compressed file to the

computer. (See Figure 178.)

4. Extract all the files from the compressed file and copy the extracted files to the SD card. Follow the

instructions on page 147 to install the update to the MATE3.

Figure 176 Download Firmware from Home Page

Click here to start the download.

NOTE:

This icon may be located on several different pages
within the web site.