Outback Power Systems MATE3 Owners Manual - Manual (Page 79)

System Settings
900-0117-01-00 Rev C 77
Date and Time
The Date and Time screen allows the date and time to be set for the current date and current time.
IMPORTANT:
 Some features are dependent on time and date settings. Be sure to adjust
these settings for the proper time and date for the location of the
installation.
 The MATE3 clock does not automatically adjust for daylight savings time.
 The MATE3 does automatically adjust for leap year.
Figure 78 Date and Time Menu Item
LCD Display
Ambient lighting and personal eyesight varies with every installation. Therefore, the contrast, color,
brightness, backlighting, and auto timeout of the LCD can be adjusted to provide the best visibility for a
given location.
Figure 79 LCD Display
Day of the week
Mon (Monday) to
Sun (Sunday)
Hour
0 to 23
Minutes
00 to 59
Day
1 to 31
Month
Jan (January) to
Dec (December)
Year
2011+
Set Points:
 Contrast – Range is from 1 to 100, from lowest contrast to highest contrast.
 Color – Range is from 1 to 11 discrete display colors.
 Brightness – Range is from 1 to 10, from dimmest to brightest.
 Backlight – On, Off or Auto (see Auto Timeout below).
 Auto Timeout – The amount of time that will elapse before the screen backlight turns off.
Range is from 1 to 300 seconds.