Erasing data logs for the flexnet battery monitor, Data logs – Outback Power Systems MATE3 Owners Manual User Manual
Page 143
Data Logs
900-0117-01-00 Rev C
141
Erasing Data Logs for the FLEXnet Battery Monitor
Figure 170 Erasing a Data Log for the FLEXnet DC Battery Monitor
Figure 171 Data Log Example for the Charge Controller
Figure 172 Data Log Example for the FLEXnet DC Battery Monitor
Date
In AH
In kWh
Out AH
Out kWh
Net AH
Net kWh
Min SOC
6/13/11 0 0 1
0.01 -1
-0.01 99
6/12/11 81
2.17 9
0.11 72
2.06 98
6/11/11 63
1.67 9
0.12 54
1.55 98
NOTE: This header line is included in the download.
Date AH
Kwh
Max
Amps
Max
Watts
Absorb
Time
Float
Time
Min
Battery V
Max
Battery V
MAX
VOC
6/13/11
0
0
1.2
29
0:00
0:00
24.1
29.1
122
6/12/11
38
0.9
5.5
143
0:00
0:00
24.1
29
122
6/11/11
32
0.8
5.6
144
0:00
0:00
24.1
28.7
120
NOTE: This header line is included in the download.
To erase a Data Log for the FLEXnet DC Battery
Monitor:
1. Access
the
Main Menu as shown in Figure 71.
2. Select
the
Device Data Logs menu.
3. Select
FLEXnet Battery Monitor.
4. Select
Erase Data Log on the FN Battery Monitor
Data Log menu.
5. Select
return to the
FN Battery Monitor Data Log menu.
Press
Main Menu.
Returns to the
Upload and
Save Data Log screen.