Outback Power Systems MATE3 Owners Manual - Manual (Page 67)

Operation
900-0117-01-00 Rev C 65
Control Wheel
The control wheel is a touch-sensitive navigation control with a center button located on the lower half of
the MATE3.
 The control wheel scrolls forward or backward in the menu map. When the desired menu is highlighted, press
the center button to move forward into that menu map. See Figure 182 through Figure 189 starting on
page 162 for a complete menu map.
 On screens with set points, the control wheel serves two functions; navigation and set point adjustment. It
navigates through the set points by highlighting each set point field with a box. This is called the Field Select
mode. When the desired field is highlighted, pressing the center button changes the appearance of the box to
solid. This is the Adjust Set Point mode. The set points can now be adjusted by using the control wheel;
clockwise increases the value, counterclockwise decreases the value. When the set point is correct, press the
center button again to return to Field Select mode. (See Figure 70.)
~ Set points are adjustable settings for each specific menu item.
~ Set points will vary depending on the system configuration.
Figure 66 Control Wheel
To use the control wheel:
Touch the control wheel anywhere and make a circular motion around the wheel.
Figure 67 Using the Control Wheel
To select the option
or setting value:
Press the button in the
center of the control wheel.
To scroll to the next menu or
increase the value of the setting:
Touch the control wheel and
make a clockwise circle.
To scroll to the previous menu or
decrease the value of the setting:
Touch the control wheel and make
a counter-clockwise circle.
Control Wheel Center Button