Outback Power Systems MATE3 Owners Manual - Manual (Page 152)

Troubleshooting
150 900-0117-01-00 Rev C
Event Messages
The Events LED indicates that an event has occurred which requires attention. If this LED illuminates,
follow the steps illustrated in Figure 181 to help determine the nature of the fault. This may also help
resolve it.
Figure 180 Event Notification
Look
Check
System Indicator Legend
OK System Operational
! Check Battery (with FNDConly)
X
Battery Critical (with FNDConly)
! Check Generator (Off Grid system type only)
! Check Inverter
!
Check Utility Grid
(with a Grid Tied system type only)
These system indicators are often specific to certain products or system
configurations, as noted in the table. See pages 34 through 36 for details.