Outback Power Systems MATE3 Owners Manual - Manual (Page 105)

Inverter Settings
900-0117-01-00 Rev C 103
Reset the Inverter to Factory Defaults
This menu allows the user to erase all settings from the selected inverter and start over with the values
programmed at the factory. These values are listed in the inverter Operator’s Manual.
Figure 121 Restoring the Inverter to Factory Default Settings
Press to return
to the
Inverter menu.
To access the Reset Inverter to Factory Defaults menu:
1. Access the Main Menu as shown in Figure 71.
2. Select the Settings Menu. (This option may be
highlighted by default.)
3. Select Inverter in the device Settings Menu.
4. Select the Reset to Factory Defaults menu.
5. Use the soft keys to select No or Yes.
 If is selected, the screen returns to the
Inverter menu. No changes will be made to
any settings.
 If is selected, the inverter’s settings will
immediately change to the original factory values.
The screen will display the message
Inverter
Restored to Factory Defaults. A
soft key will appear. Pressing this key will return
the screen to the
Inverter menu.
6. After resetting the inverter to factory default
parameters:
 press the soft key or the Up
navigation key to return to the Inverter menu, or
 press the Top navigation key to return to the
Settings Menu.