Outback Power Systems MATE3 Owners Manual - Manual (Page 6)

Important Safety Instructions
4 900-0117-01-00 Rev C
Regulatory Specifications
See page 153 for all specifications and regulatory information, including certifications.
Required Resources
This product is required to be installed according to pertinent safety codes and standards. If installed in
the United States, wiring practices must meet the requirements of the National Electrical Code (NEC).
If installed in Canada, wiring practices must meet the requirements of the Canadian Electrical Code.
~ National Electrical Code (NEC)/NFPA 70, Current Edition
~ Canadian Electrical Code C22.1, Current Edition
Additional Resources
The following are references which may be used when installing this equipment. Depending on the
nature of the installation, it may be highly recommended to consult any or all of these resources.
~ National Electrical Code (NEC)/NFPA 70 Handbook, Current Edition
~ UL 1741, Current Edition, Static Inverter and Charge Controllers for Use in Photovoltaic Power Systems
~ International Building Code (IBC), Current Edition
~ Photovoltaic Power Systems and the 2005 National Electrical Code: Suggested Practices