HP XP P9500 Storage - Manual (Page 584)

Message
ID
Message Text Explanation
KAPL15404
-W
The HDLM Manager was executed by
the user who does not have the
authority.
-
Return Codes for Hitachi Command Suite Common Agent
Component
When an operation requested of HDLM from Global Link Manager terminates
abnormally, or terminates normally with a warning, HDLM outputs one of the
return codes described below.
Message ID Explanation
1002 Details
There is no path on which the operation can be performed.
Action
Refresh the host information, check the path status, and
then perform the operation again.
1003 Details
No path was detected.
Action
Check whether a path between the host and the storage
system is connected. If a path is connected, check whether
HDLM is configured correctly.
1004 Details
Memory required for HDLM internal processing could not be
allocated.
Action
Terminate unnecessary applications to increase free
memory, or restart the host.
1006 Details
An Offline path cannot be placed Online.
Action
Remove the error in the path, and then retry.
1007 Details
The target path of the offline operation is the last,
remaining path connected to the device and therefore,
cannot be placed in the offline status.
Action
Click Refresh to update the host information, check the path
status, and then retry the offline operation.
1015 Details
The Offline path cannot be placed Online.
8-128
Messages
Hitachi Dynamic Link Manager User Guide for Solaris ®