HP XP P9500 Storage - Manual (Page 189)

# newfs /dev/md/rdsk/d300
5
.
Mount the Solaris basic file system of the post-migration environment.
For example:
# mount /dev/md/dsk/d100 /mnt0
# mount /dev/md/dsk/d300 /mnt1
6
.
Copy the existing Solaris basic file system to the post-migration
environment.
For example:
# ufsdump 0f - / | (cd /mnt0; ufsrestore rf -)
# ufsdump 0f - /usr | (cd /mnt1; ufsrestore rf -)
7
.
Edit the file /etc/vfstab (/mnt0/etc/vfstab) of the boot disk after the
migration to change the definition of the swap after the migration to the
metadevice /dev/md/dsk/d200 and the definition of /usr after the
migration to the metadevice /dev/md/ds/d300.
Before change:
/dev/md/dsk/d20 - swap - no -
/dev/md/dsk/d30 /dev/md/rdsk/d30 /usr ufs 1 no -
After change:
/dev/md/dsk/d200 - swap - no -
/dev/md/dsk/d300 /dev/md/rdsk/d300 /usr ufs 1 no -
8
.
Edit the file /etc/dumpadm.conf (/mnt0/etc/dumpadm.conf) of the boot
disk after the migration to change the definition of the dump device
specified for the parameter DUMPADM_DEVICE to the boot disk of the post-
migration environment.
Before change:
DUMPADM_DEVICE=/dev/md/dsk/d20
After change:
DUMPADM_DEVICE=/dev/md/dsk/d200
9
.
Execute the metaroot command, using the -R option to specify the mount
point of the / (root) file system after the migration.
# metaroot -R /mnt0 d100
10
.
In order to boot from the post-migration environment, determine the boot
device name for the OBP.
Only the path used by HDLM to determine the logic device file name of
the HDLM device of the boot disk can be specified as the boot device.
Creating an HDLM Environment
3-123
Hitachi Dynamic Link Manager User Guide for Solaris ®