HP XP P9500 Storage - Manual (Page 463)

Message
ID
Message Text Explanation
Execute the view operation of the
HDLM command (dlnkmgr view
-path) and check the value
displayed in PathName. Use the
two leftmost digits of PathName
for the relevant HBA port, and
then retry. For details on the
view operation, see
view (Displays
Information) on page 6-32 .
KAPL01016
-W
The target CHA port was not found.
Operation name = aa...aa
Details
The path ID indicated by -pathid
and required by the -cha
parameter is not an object of
HDLM management.
aa...aa: monitor, offline, or
online
Action
¢
When AutoPATH_ID is
specified for -pathid:
Execute the view operation
of the HDLM command
(dlnkmgr view -path) to
check the target CHA port
and the AutoPATH_ID that
passes through that CHA
port. Next, specify the
corresponding AutoPATH_ID,
and retry the operation. For
details on the view
operation, see view (Displays
Information) on page 6-32 .
¢
When CHA_ID is specified for
-chaid:
Execute the view operation
of the HDLM command
(dlnkmgr view -cha) to
check the target CHA port
and the CHA_ID of that CHA
port. Next, specify the
corresponding CHA_ID, and
retry the operation. For
details on the view
operation, see view (Displays
Information) on page 6-32 .
KAPL01018
-W
The target device was not found.
Operation name = aa...aa
Details
The specified host device name
could not be found.
aa...aa: view
Action
Messages
8-7
Hitachi Dynamic Link Manager User Guide for Solaris ®