HP XP P9500 Storage User Manual
Page 445
Display example
Example
The entries for the following devices are output:
¢
sd or ssd devices for HDLM-managed devices
¢
HDLM devices that are not actually created
Only one HDLM device is created for one HDLM-managed device (one
slice). However, VxVM assumes that the number of HDLM devices
created for one HDLM-managed device is the same as the number of
physical paths. Thus, executing the dlmvxexclude utility outputs
entries for HDLM devices that have not actually been created.
Entries for these devices are output for each LU, and are sorted in
alphabetic order, using the logical device file name as a key.
exclude_all 0
paths
c3t0d10s2 /pci@8,600000/pci@1/JNI,FCE@4/sd@0,a
c3t0d11s2 /pci@8,600000/pci@1/JNI,FCE@4/sd@0,b
c3t0d12s2 /pci@8,600000/pci@1/JNI,FCE@4/sd@0,c
c3t0d13s2 /pci@8,600000/pci@1/JNI,FCE@4/sd@0,d
c4t1d10s2 /pci@8,600000/pci@1/JNI,FCE@5/sd@1,a
c4t1d11s2 /pci@8,600000/pci@1/JNI,FCE@5/sd@1,b
c4t1d12s2 /pci@8,600000/pci@1/JNI,FCE@5/sd@1,c
c4t1d13s2 /pci@8,600000/pci@1/JNI,FCE@5/sd@1,d
c6t1d10s2 /pseudo/dlmndrv@2/dlmfdrv@1,a
c6t1d11s2 /pseudo/dlmndrv@2/dlmfdrv@1,b
c6t1d12s2 /pseudo/dlmndrv@2/dlmfdrv@1,c
c6t1d13s2 /pseudo/dlmndrv@2/dlmfdrv@1,d
#
controllers
#
product
#
pathgroups
#
Note
•
Only a user with root permissions can execute the dlmvxexclude utility
for assisting creation of the VxVM configuration file.
•
After installing HDLM, you need to execute the dlmvxexclude utility after
executing the dlmsetconf utility for creating the HDLM driver
configuration definition file.
•
Do not use the output result of the dlmvxexclude utility as is for the
vxvm.exclude file. If a device other than the HDLM-managed devices has
already been invalidated in VxVM, then the invalidated setting might be
canceled.
Utility Reference
7-31
Hitachi Dynamic Link Manager User Guide for Solaris
®